BlitzART - with MORE protection
Because several times is better
Protection modules with two to four levels - for more functions
Lightning protection
up to 5,000 amps and 10,000 volts
Short-circuit protection
No defect after incorrect wiring
Overcurrent protection
Extended device protection
Signal enhancement
Reach optimisation
BlitzART protection modules (overview)
KNX / auxiliary voltage
- 1,000 amps (8/20 µs)
- Type 3 / Pulse class C2
- Two-stage arrester
- 5 bidirectional protective paths
- Protection level < 220 V (sw / rt)
- Capacity 1 nF
RS-485 / RS-422 / DMX / Modbus RTU
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Three-stage arrester
- 11 bidirectional protective paths
- Protection level bus side < 616 V
- Protection level unit side < 10 V
- Capacity 75 pF
- CurrentCut 200 mA
RS-232
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Three-stage arrester
- 12 bidirectional protective paths
- Protection level bus side < 443 V
- Protection level unit side < 10 V
- Capacity 400 pF
- CurrentCut 200 mA
CAN-Bus
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Three-stage arrester
- 11 bidirectional protective paths
- Protection level bus side < 606 V
- Protection level unit side < 10 V
- Capacity 75 pF
- CurrentCut 200 mA
1-Wire Loxone Extension
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Four-stage arrester
- 24 bidirectional protective paths
- Protection level bus side < 521 V
- Protection level unit side < 10 V
- Capacity 90 pF
- CurrentCut 50 mA
- Bandpass filter as interference protection
- BusBoost for optimum range
1-Wire Professional Busmaster
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Four-stage arrester
- 24 bidirectional protective paths
- Protection level bus side < 521 V
- Protection level unit side < 10 V
- Capacity 90 pF
- CurrentCut 50 / 200 mA
- Bandpass filter as interference protection
BlitzART
mit dem MEHR an Schutz
Because several times is better
Protection modules with two to four levels - for more functions
Lightning protection
up to 5,000 amps and 10,000 volts
Short-circuit protection
No defect after incorrect wiring
Overcurrent protection
Extended device protection
Signal enhancement
Reach optimisation
BlitzART protection modules (overview)
KNX / auxiliary voltage
- 1,000 amps (8/20 µs)
- Type 3 / Pulse class C2
- Two-stage arrester
- 5 bidirectional protective paths
- Protection level < 220 V (sw / rt)
- Capacity 1 nF
RS-485 / RS-422 / DMX / Modbus RTU
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Three-stage arrester
- 11 bidirectional protective paths
- Protection level bus side < 616 V
- Protection level unit side < 10 V
- Capacity 75 pF
- CurrentCut 200 mA
RS-232
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Three-stage arrester
- 12 bidirectional protective paths
- Protection level bus side < 443 V
- Protection level unit side < 10 V
- Capacity 400 pF
- CurrentCut 200 mA
CAN-Bus
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Three-stage arrester
- 11 bidirectional protective paths
- Protection level bus side < 606 V
- Protection level unit side < 10 V
- Capacity 75 pF
- CurrentCut 200 mA
1-Wire Loxone Extension
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Four-stage arrester
- 24 bidirectional protective paths
- Protection level bus side < 521 V
- Protection level unit side < 10 V
- Capacity 90 pF
- CurrentCut 50 mA
- Bandpass filter as interference protection
- BusBoost for optimum range
1-Wire Professional Busmaster
- 5,000 amps (8/20 µs)
- 10,000 volts (1.2/50 µs)
- Type 2 / Pulse class C2
- Four-stage arrester
- 24 bidirectional protective paths
- Protection level bus side < 521 V
- Protection level unit side < 10 V
- Capacity 90 pF
- CurrentCut 50 / 200 mA
- Bandpass filter as interference protection